TDS Bankası › PETKIM › PETILEN YY S0564
PETKIM PETILEN YY S0564
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 0.51 g/10min |
|---|---|
| Erime Noktası | 134.0 °C |
| Çekme Dayanımı | 28.0 MPa |
| Eğme Modülü | 1150.0 MPa |
| Izod (çentikli) | 300.0 J/m |
| Vicat | 128.0 °C |
| Sertlik | 65.0 - |
| Kopma Uzaması | 1115.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Blow molding Monofilaments, raffia, LDPE/LLDPE coex films (in middle layer of coex films to increase stiffness and mechanical properties) Compliance to Regulations The formulation and production of PETILEN YY S0564 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 0.51 g/10 min ASTM D1238 Density, 23°C (1) 0.961 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 134 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 28 MPa ASTM D638 Tensile Str