TDS Bankası › PETKIM › PETILEN YY F00556
PETKIM PETILEN YY F00556
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 0.05 g/10min |
|---|---|
| Erime Noktası | 131.0 °C |
| Çekme Dayanımı | 24.0 MPa |
| Eğme Modülü | 1000.0 MPa |
| Izod (çentikli) | 340.0 J/m |
| Vicat | 124.0 °C |
| Sertlik | 64.0 - |
| Kopma Uzaması | 850.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Film extrusion: shopping bags, disposal waste bags and high quality thin films production Compliance to Regulations The formulation and production of PETILEN YY F00556 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 0.05 g/10 min ASTM D1238 Density, 23°C (1) 0.953 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 131 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 24 MPa ASTM D638 Tensile Strength at Break 36 MPa ASTM D638 Elongation at B