TDS Bankası › PETKIM › PETILEN YY I768(UV)
PETKIM PETILEN YY I768(UV)
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.768 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 6.8 g/10min |
| Erime Noktası | 134.0 °C |
| Çekme Dayanımı | 30.0 MPa |
| Eğme Modülü | 1200.0 MPa |
| Izod (çentikli) | 50.0 J/m |
| Vicat | 124.0 °C |
| Sertlik | 66.0 - |
| Kopma Uzaması | 1000.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Injection molding (crates, cases, trays and similar items) Compliance to Regulations The formulation and production of PETILEN YY I768(UV) conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 6.8 g/10 min ASTM D1238 Density, 23°C (1) 0.965 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 134 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 30 MPa ASTM D638 Tensile Strength at Break 17 MPa ASTM D638 Elongation at Break 1000 % ASTM D638 Flexural