TDS Bankası › PETKIM › PETILEN YY I860(O)
PETKIM PETILEN YY I860(O)
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.86 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 7.5 g/10min |
| Erime Noktası | 132.0 °C |
| Çekme Dayanımı | 30.0 MPa |
| Eğme Modülü | 1200.0 MPa |
| Izod (çentikli) | 40.0 J/m |
| Vicat | 126.0 °C |
| Sertlik | 64.0 - |
| Kopma Uzaması | 500.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Injection molding: organoleptic caps and closures for still water and soft drink bottles Compliance to Regulations The formulation and production of PETILEN YY I860(O) conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 7.5 g/10 min ASTM D1238 Density, 23°C (1) 0.960 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 132 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 30 MPa ASTM D638 Tensile Strength at Break 20 MPa ASTM D638 Elongation at Br