TDS Bankası › PETKIM › PETILEN YY I457(O)
PETKIM PETILEN YY I457(O)
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 4.0 g/10min |
|---|---|
| Erime Noktası | 133.0 °C |
| Çekme Dayanımı | 29.0 MPa |
| Eğme Modülü | 1000.0 MPa |
| Izod (çentikli) | 60.0 J/m |
| Vicat | 122.0 °C |
| Sertlik | 62.0 - |
| Kopma Uzaması | 1000.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Injection and rotary compression molding: organoleptic caps and closures for still (non-carbonated) mineral water and non-carbonated soft drink bottles Compliance to Regulations The formulation and production of PETILEN YY I457(O) conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 4.0 g/10 min ASTM D1238 Density, 23°C (1) 0.957 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 133 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 29 MPa ASTM D