TDS Bankası › PETKIM › PETILEN YY S0459
PETKIM PETILEN YY S0459
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 0.4 g/10min |
|---|---|
| Erime Noktası | 132.0 °C |
| Çekme Dayanımı | 28.0 MPa |
| Eğme Modülü | 1000.0 MPa |
| Izod (çentikli) | 120.0 J/m |
| Vicat | 125.0 °C |
| Sertlik | 65.0 - |
| Kopma Uzaması | 500.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Blow Molding: small and medium sized containers for shampoo, bleach, personal care products etc. Compliance to Regulations The formulation and production of PETILEN YY S0459 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 0.40 g/10 min ASTM D1238 Density, 23°C (1) 0.956 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 132 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 28 MPa ASTM D638 Tensile Strength at Break 31 MPa ASTM D638 Elongatio