TDS Bankası › PETKIM › PETILEN YY S00750
PETKIM PETILEN YY S00750
Yüksek Yoğunluklu Polietilen (HDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.75 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 0.076 g/10min |
| Erime Noktası | 134.0 °C |
| Çekme Dayanımı | 24.0 MPa |
| Eğme Modülü | 950.0 MPa |
| Izod (çentikli) | 380.0 J/m |
| Vicat | 128.0 °C |
| Sertlik | 63.0 - |
| Kopma Uzaması | 875.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Blow molding: large-sized containers (up to 100L) Non-pressure pipe and telecom conduits Compliance to Regulations The formulation and production of PETILEN YY S00750 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 0.076 g/10 min ASTM D1238 Density, 23°C (1) 0.950 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 134 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 24 MPa ASTM D638 Tensile Strength at Break 31 MPa ASTM D638 Elongation at B