TDS Bankası › PETKIM › PETILEN YY I860(UV)
PETKIM PETILEN YY I860(UV)
Yüksek Yoğunluklu Polietilen (HDPE) · UV dayanımlı
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.86 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 7.5 g/10min |
| Erime Noktası | 132.0 °C |
| Çekme Dayanımı | 30.0 MPa |
| Eğme Modülü | 1200.0 MPa |
| Izod (çentikli) | 40.0 J/m |
| Vicat | 126.0 °C |
| Sertlik | 64.0 - |
| Kopma Uzaması | 500.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Injection molding: crates, boxes, cases, trays, baskets, housewares, toys etc. Compliance to Regulations The formulation and production of PETILEN YY I860(UV) conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (190°C/2.16 kg) 7.5 g/10 min ASTM D1238 Density, 23°C (1) 0.960 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 132 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 30 MPa ASTM D638 Tensile Strength at Break 20 MPa ASTM D638 Elongation at Break >500