TDS Bankası › VERSALIS › Impressio HIPS E05
VERSALIS Impressio HIPS E05
Polistiren (PS)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 1.04 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 4.0 g/10min |
| Çekme Dayanımı | 28.0 MPa |
| Çekme Modülü | 1900.0 MPa |
| Izod (çentikli) | 6.5 J/m |
| HDT (ısıl bükülme) | 85.0 °C |
| Vicat | 99.0 °C |
| Sertlik | 65.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Açıklama
Water absorption 24h - 23°C ISO 62 % < 0,1 Density - ISO 1183 g/cm³ 1,04 Bulk density
Uygulamalar
Impressio® HIPS E 05 has been designed to produce: ⦁ 1.75 mm and 2.85 mm filaments for 3D printing. Typical processing data Impressio® HIPS E 05 has a very good processability with standard filament extruders and it allows a good thickness stability. Standard processing conditions (*) for the production of a 1.75 mm to 2.85 mm filament: ⦁ melt temperature 210 - 240°C (*) The processing conditions may vary depending on the extrusion line and the cooling conditions. Certification Impressio® HIPS E 05, as supplied in the original packaging, by composition is compliant to some existing regulations