TDS Bankası › VERSALIS › Edistir ICE R 930 XP
VERSALIS Edistir ICE R 930 XP
Polistiren (PS)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 1.04 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 2.5 g/10min |
| Çekme Dayanımı | 23.0 MPa |
| Çekme Modülü | 1450.0 MPa |
| Izod (çentikli) | 8.0 J/m |
| HDT (ısıl bükülme) | 75.0 °C |
| Vicat | 98.0 °C |
| Sertlik | 42.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Açıklama
Water absorption 24h - 23°C ISO 62 % < 0,1 Density - ISO 1183 g/cm³ 1,04 Bulk density
Uygulamalar
Edistir® ICE R 930 XP is suitable for: ⦁ inner liners and frames for refrigerators ⦁ packaging for fatty foods. Typical processing data Extrusion: ⦁ melt temperature 210-240°C Injection moulding: ⦁ predrying normally not required ⦁ melt temperature 210-260°C ⦁ mould temperature 20-60°C Certification ✔ UL 94 Edistir® ICE R 930XP, as supplied in the original packaging, by composition is compliant to some existing regulations on plastic materials intended for food contact. Storage Store away from atmospheric agents and direct sunlight, away from sources of heat and light. The product, if stored c