BOREALIS Daplen EF155AE
Teknik Özellikler
| Yoğunluk | 0.95 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 18.0 g/10min |
| Çekme Dayanımı | 18.0 MPa |
| Charpy (çentikli) | 35.0 kJ/m² |
| HDT (ısıl bükülme) | 90.0 °C |
Açıklama
Daplen EF155AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications Daplen EF155AE has been developed especially for the car industry to be used in automotive exterior parts. Bumpers Exterior trims Special Features High flowabilit
Uygulamalar
Daplen EF155AE has been developed especially for the car industry to be used in automotive exterior parts. Bumpers Exterior trims Special Features High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios" Physical Properties Values determined on standard injection moulded specimens conditioned at 23°C and 50% relative humidity after at least 96 hours storage time. Property Typical Value Test Method Data should not be used for specification work Density 950 kg/m³ ISO 1183 Melt Flow Rate (230 °C/2,16 kg) 18 g/10min ISO 1133 Flexural Modulus (2