TDS Bankası › VERSALIS › Impressio ABS C02
VERSALIS Impressio ABS C02
ABS
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 1.04 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 5.0 g/10min |
| Çekme Dayanımı | 44.0 MPa |
| Çekme Modülü | 2200.0 MPa |
| Charpy (çentikli) | 18.0 kJ/m² |
| Izod (çentikli) | 19.0 J/m |
| HDT (ısıl bükülme) | 96.0 °C |
| Vicat | 103.0 °C |
| Sertlik | 110.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Açıklama
Water absorption 24h - 23°C ISO 62 % 0,3 Density - ISO 1183 g/cm³ 1,04 Rheological
Uygulamalar
Impressio® ABS C 02 has been designed to produce: ⦁ 1.75 mm and 2.85 mm filaments for 3D printing. Typical processing data Impressio® ABS C 02 has a very good processability with standard filament extruders and it allows a good thickness stability. Standard processing conditions (*) for the production of a 1.75 mm to 2.85 mm filament: ⦁ melt temperature 210 - 240°C (*) The processing conditions may vary depending on the extrusion line and the cooling conditions. Certification Impressio® ABS C 02, as supplied in the original packaging, by composition is compliant to some existing regulations on