TRINSEO ALTUGLAS HFI-7
Teknik Özellikler
| Yoğunluk | 1.17 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 10.0 g/10min |
| Çekme Dayanımı | 48.0 MPa |
| Eğme Modülü | 2300.0 MPa |
| Charpy (çentikli) | 3.0 kJ/m² |
| Vicat | 90.0 °C |
| Sertlik | 65.0 - |
Açıklama
ALTUGLAS™ HFI (High Flow and Impact) grades offer superior flow and mould release properties for excellent processability and reduced cycle times, even for the most critical injection work. HFI materials offer outstanding impact resistance and flexibility.
Uygulamalar
Automotive & Transportation Health, Hygiene & Beauty Building & Construction Composites & advanced materials Consumer Electronics Sport & Leisure Physical Nominal Value (English) Nominal Value (SI) Test Method Density 1.17 g/cm³ 1.17 g/cm³ ISO 1183 Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) 10 g/10 min 10 g/10 min ISO 1133 Molding Shrinkage - Flow 2.0E-3 to 6.0E-3 in/in 0.20 to 0.60 % ASTM D955 Water Absorption ISO 62 Equilibrium, 73°F (23°C), 50% RH 0.33 % 0.33 % Mechanical Nominal Value (English) Nominal Value (SI) Test Method Tensile Stress (Break, 73°F (23°C)) 6960 psi 48.0 MPa ISO 527-2/50