TDS Bankası › REPSOL › ISPLEN PM 270 XT
REPSOL ISPLEN PM 270 XT
· mineral dolgu
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 1.04 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 20.0 g/10min |
| Çekme Dayanımı | 32.0 MPa |
| Izod (çentikli) | 2.7 J/m |
| HDT (ısıl bükülme) | 106.0 °C |
| Vicat | 153.0 °C |
| Sertlik | 73.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Açıklama
Melt flow rate (230ºC/2.16Kg) 12 g/10min ISO 1133 Density at 23ºC 1,040 kg/m3 ISO 1183 Mechanical Flexural modulus of elasticity 2,600 MPa ISO 178 Tensile modulus of elasticity 2,400 MPa ISO 527-2 Tensile strength at yield 32 MPa ISO 527-2 Tensile strain at yield 5 % ISO 527-2 Izod impact strength (23ºC, notched) 2.7 kJ/m2 ISO 180 Izod impact strength (23ºC, unnotched) 30 kJ/m2 ISO 180 Izod impact
Uygulamalar
Automotive: under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). Air conditioning elements inside the car. Technical pieces, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.