TDS Bankası › PETLIN SDN › PETLIN LD N119X
PETLIN SDN PETLIN LD N119X
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 1.9 g/10min |
|---|---|
| Erime Noktası | 108.0 °C |
| Çekme Modülü | 175.0 MPa |
| Vicat | 89.0 °C |
| Sertlik | 50.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Foams, lamination films, bubble films, blow moulding of small squeezy bottles, foams. Extrusion Conditions : For blown film: Melt temperature 150-170oC, recommended blow-up-ratio of 2 to 3 : 1. Typical Data : Properties Units Typical values Test methods Polymer properties : Melt Flow Rate: dg/min 1.9 ISO 1133 Density kg/m3 921 ISO 1183 (A) Optical properties (25 microns film) : Gloss (45o) % 58 ASTM D2457 Haze % 8.3 ASTM D1003A Mechanical properties : Hardness Shore D - 50 ISO 868 Modulus of elasticity N/mm2 175 ISO 527-2 Thermal properties : o Vicat Softening Temperature C 89 ISO 306 o Meltin