TDS Bankası › PETKIM › PETOPLEN MH220
PETKIM PETOPLEN MH220
Polietilen (PE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.905 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 2.5 g/10min |
| Erime Noktası | 163.0 °C |
| Çekme Dayanımı | 33.0 MPa |
| Eğme Modülü | 1370.0 MPa |
| Izod (çentikli) | 23.0 J/m |
| HDT (ısıl bükülme) | 83.0 °C |
| Sertlik | 94.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Monofilaments for Big Bags and similar bags, ropes, sheets, etc. Compliance to Regulations The formulation and production of PETOPLEN MH220 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (230°C/2.16 kg) 2.5 g/10 min ASTM D1238 Density 0.905 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 163 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 33 MPa ASTM D638 Flexural Modulus, 23°C 1370 MPa TS EN ISO 178 Izod Impact Strength, 23°C (notched) 23 J/m ASTM D2