TDS Bankası › PETKIM › PETOPLEN EH161
PETKIM PETOPLEN EH161
Polietilen (PE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.905 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 16.0 g/10min |
| Erime Noktası | 163.0 °C |
| Çekme Dayanımı | 36.0 MPa |
| Eğme Modülü | 1460.0 MPa |
| Izod (çentikli) | 20.0 J/m |
| HDT (ısıl bükülme) | 85.0 °C |
| Sertlik | 96.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Injection molding: bottle caps, dishes, toys, kitchen and bath equipments Compliance to Regulations The formulation and production of PETOPLEN EH161 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011. Properties Typical Values (*) Units Test Methods Resin Properties Melt Flow Rate (230°C/2.16 kg) 16 g/10 min ASTM D1238 Density 0.905 g/cm³ ASTM D1505 Melting Point (DSC, 2nd heating) 163 °C ASTM D3418 Mechanical Properties (**) Tensile Strength at Yield 36 MPa ASTM D638 Flexural Modulus, 23°C 1460 MPa TS EN ISO 178 Izod Impact Strength, 23°C (notched) 20 J/m