TDS Bankası › OQ › LUBAN EP2348UC
OQ LUBAN EP2348UC
Polipropilen (PP)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.9 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 70.0 g/10min |
| Çekme Dayanımı | 28.0 MPa |
| Çekme Modülü | 1450.0 MPa |
| Charpy (çentikli) | 4.0 kJ/m² |
| HDT (ısıl bükülme) | 95.0 °C |
| Vicat | 151.0 °C |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Açıklama
Luban EP2348UC is manufactured using the Spheripol Technology. Luban EP2348UC is a nucleated impact copolymer polypropylene with antistatic additivation, used in injection molding applications. The grade exhibits a good impact/stiffness balance combined with a high flow. The grade is recommended for applications like cont
Uygulamalar
Thin wall injection molding (TWIM) containers for deep freeze packaging, houseware, containers, sports, leisure & toys. Properties (Typical Values) operties (Typical Values) Property Units Test method Value Melt flow rate (230°C/2.16 kg) g/10 min ISO 1133 70