TDS Bankası › INEOS › Rigidex P 450-HP60
INEOS Rigidex P 450-HP60
Polipropilen (PP)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 60.0 g/10min |
|---|---|
| Eğme Modülü | 1400.0 MPa |
| HDT (ısıl bükülme) | 105.0 °C |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
• Very Thin Walled Technical Mouldings • Yellow fat containers • Housewares Benefits and Features • Very good impact, even below 0ºC • Low warpage • Very high flowability • Very short cycle time • Antistatic Properties Test Methods Values Units Physical Melt Flow Rate 230ºC/2.16kg ISO 1133 60 g/10min Mechanical Flexural Modulus @23ºC ISO 178 1400 MPa Izod impact strength, notched @+23ºC ISO 180/1A 6.2 kJ/m² @-20ºC ISO 180/1A 4.2 kJ/m² Thermal HDT @0.45 MPa ISO 75/B 105 ºC - Data should not be used for specification work October, 2009 Published by Rigidex® P 450-HP60 Regulatory Information The