TDS Bankası › INEOS › INEOS LDPE M21G764
INEOS INEOS LDPE M21G764
Lineer Alçak Yoğunluklu Polietilen (LLDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.926 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 0.95 g/10min |
| Çekme Dayanımı | 11.0 MPa |
| Vicat | 97.0 °C |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
M21G764 are particularly suitable for mono and co-extrusion applications such as deep freeze, form fill seal film in general and thin bags. In blends and co-extrusions, they can be used to boost the impact strength of LLDPE, LDPE and recycled polyethylene. M21G764 are ionomers, produced by neutralisation of an ethylene - methacrylic acid copolymer. M21G764 contains only antiblock. They offer the following properties: • Very high impact strength at ambient and low temperatures • Exceptional drawdown M 21 G 764 can be added if a lower slip level is required or used pure for low slip films. Addit