TDS Bankası › INEOS › INEOS LDPE 24W930
INEOS INEOS LDPE 24W930
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.93 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 55.0 g/10min |
| Erime Noktası | 108.0 °C |
| Çekme Dayanımı | 10.4 MPa |
| Çekme Modülü | 260.0 MPa |
| Eğme Modülü | 300.0 MPa |
| Vicat | 89.0 °C |
| Sertlik | 47.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
24W930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. It is also recommended for the manufacturing of highly filled compounds. Properties Test Method Value Units Physical Melt flow rate (190°C/2.16 kg) ISO 1133 55 g/10 min Density ISO 1183 923 kg/m3 Flexural Modulus @23°C* ISO 178 300 MPa Tensile Modulus @23°C* ISO 527 260 MPa