TDS Bankası › INEOS › INEOS LDPE 23T930
INEOS INEOS LDPE 23T930
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.93 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 23.0 g/10min |
| Çekme Modülü | 180.0 MPa |
| Vicat | 92.0 °C |
| Sertlik | 49.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
23T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. Properties Conditions Test Methods Values Units Rheological Melt Flow Rate 190°C/2.16kg ISO 1133-1 22 g/10min Physical Density ISO 17855-1 23°C ISO 1183-2 923 kg/m³ Mechanical Tensile Modulus 1 mm/min ISO 527-2 180 MPa Tensile Impact Strength, notched method A1 ISO 8256 180 kJ/m² Tensile strain at break 50mm/min ISO 527-2 130 % Shore D Hardness ISO 868 49 - Vicat