TDS Bankası › INEOS › INEOS LDPE 23H430
INEOS INEOS LDPE 23H430
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 2.0 g/10min |
|---|---|
| Çekme Dayanımı | 12.0 MPa |
| Vicat | 95.0 °C |
| Kopma Uzaması | 550.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
23H430 is suitable for a variety of general-purpose packaging films, liners, carrier bags and fine shrink film. It is also recommended for cross-linked foam as well as for blow-moulding applications. Benefits and Features 23H430 is an autoclave LDPE homopolymer. It offers the following properties: • Good strength and dart drop resistance • Good drawdown • Low tendency to block If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. We recommend that you consult your INEOS O&P Europe technical representative for further advice on the use of 23H430. Properties Tes