TDS Bankası › INEOS › INEOS LDPE 20T930
INEOS INEOS LDPE 20T930
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.93 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 20.0 g/10min |
| Çekme Modülü | 170.0 MPa |
| Vicat | 77.0 °C |
| Sertlik | 39.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
20T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. It is also recommended for the manufacturing of highly filled compounds. Properties Conditions Test Methods Values Units Rheological Melt Flow Rate 190°C/2.16kg ISO 1133-1 20 g/10min Physical Density ISO 17855-1 23°C ISO 1183-1 920 kg/m³ Mechanical Tensile strain at Break 23°C, 50 mm/min ISO 527-2 120 % Tensile Impact Strength, notched ISO 8256 160 kJ/m² Tensile M