TDS Bankası › INEOS › INEOS LDPE 17L430
INEOS INEOS LDPE 17L430
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.918 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 4.0 g/10min |
| Çekme Dayanımı | 9.0 MPa |
| Çekme Modülü | 183.0 MPa |
| Eğme Modülü | 220.0 MPa |
| Vicat | 86.0 °C |
| Sertlik | 45.0 - |
| Kopma Uzaması | 411.0 % |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Extrusion coating and laminating grade designed with an outstanding low Neck In. As blending partner with other polymers the 17L430 improves the melt curtain stability and reduces the Neck In. We recommend that you consult your INEOS technical representative for further advice on the use of 17L430. Properties Conditions Test Methods Values Units Physical Melt Flow Rate 190°C/2.16Kg ISO 1133-1 4.0 g/10min Density 23°C ISO 1183-1 & ISO1872-1 918 kg/m³ Mechanical* Shore Hardness D ISO 868 45 Tensile Modulus ISO 527 183 MPa Tensile Stress at Yield ISO 527 9 MPa Elongation at Yield ISO 527 20 % Ten