TDS Bankası › INEOS › ELTEX MED PH30D630
INEOS ELTEX MED PH30D630
Alçak Yoğunluklu Polietilen (LDPE)
⬇ TDS İndir (PDF)
Darveco tarafından sağlanan teknik veri sayfası.
Teknik Özellikler
| Yoğunluk | 0.93 g/cm³ |
|---|---|
| MFR (Eriyik Akış Hızı) | 0.3 g/10min |
| Çekme Dayanımı | 14.0 MPa |
| Çekme Modülü | 400.0 MPa |
| HDT (ısıl bükülme) | 54.0 °C |
| Sertlik | 53.0 - |
Değerler tipiktir, bağlayıcı spesifikasyon değildir; kritik kullanımda üretici TDS ile teyit edin.
Uygulamalar
Eltex® MED PH30D630 can be used in “blow-fill and seal” machines for the production of ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. Eltex® MED PH30D630 withstands steam sterilization above 110 °C. Properties Conditions Test Methods Values Units Physical Density ISO1183-1 & ISO 1872-1 930 kg/m³ Melt Flow Rate 190°C/2.16 kg ISO 1133-1 0.3 g/10 min Mechanical Tensile Stress at Yield 50 mm/min ISO 527-1,-2 14 MPa Tensile Modulus 1 mm/min ISO 527-1,-2 400 MPa Hardness Shore D