BRASKEM Braskem PE SLL318_1
Teknik Özellikler
| MFR (Eriyik Akış Hızı) | 2.7 g/10min |
|---|---|
| Çekme Dayanımı | 30.0 MPa |
| Eğme Modülü | 200.0 MPa |
| Kopma Uzaması | 882.0 % |
Açıklama
SLL318 is a Linear Low Density Polyethylene developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications:
Uygulamalar
Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes; insulation for low and medium tension XLPE wires and cables. Process: Recommended processing conditions for film extrusion about 170 - 210 ºC. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. Control Properties